Shop Floor Talk  

Go Back   Shop Floor Talk > Welding and Metalworking Forums > Fabrication

SFT Search:   
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 07-18-2019, 07:38 PM
Ironman's Avatar
Ironman Ironman is offline
Iron Modification Investigator
 
Join Date: Feb 2008
Location: Warburg, Alberta, Canada
Posts: 13,797
Default Seed plant plate valve

I haven't posted a project for a while, house is eating the clock for me. I ended up with a new customer that I did not want to brush off, so I have been doing dome work for a seed cleaning plant. They seem as grateful as a puppy, and it turns out their machinery is full of parts that are no longer made. So they have been flogged to the point where they don't run. Shafts half worn through from crap rubbing on them. But clean, everything is clean, no mud or cowshit.

Except they had a drunk Satan worshiper that thought he could weld, and I had to remove some of his welds with a cold chisel. The blobs are big enough that they hurt to step on with running shoes.

So this project is a chute at the bottom of the bin. 8 inch square hole where it bolts to the bin, and it makes an elbow and reduces to 5x5 square. In the 5x5 section they had a plate butterfly for shutting off the grain flow. This would sooner or later have straw or crap wound up in it and stop working and they had to take it apart and shovel up the grain spill to clean the butterfly.

My plan is for a sliding plate at the 8x8 opening. I chiseled and ground out the offending welds, and re-welded it in areas that affect my contribution to the critter.
In pic 1 you can see the square butterfly and the discharge chute.
In the second picture are the slide rails I attached to put a 1/4" steel slide plate on.
In the last picture is the slide plate in place with the rails made of 3/8" round stock and a grain deflector welded above them to divert the flow over the rail and keep the plate from flipping out.
Attached Thumbnails
Click image for larger version

Name:	DSC03886.jpg
Views:	158
Size:	196.1 KB
ID:	151538   Click image for larger version

Name:	DSC03889.jpg
Views:	150
Size:	197.4 KB
ID:	151539   Click image for larger version

Name:	DSC03888.jpg
Views:	150
Size:	195.0 KB
ID:	151540   Click image for larger version

Name:	DSC03890.jpg
Views:	156
Size:	193.6 KB
ID:	151541  
__________________
Gerry
You got freedom of speech, if you don't say too much.
Aaron Neville.

The virtue is always a cover for the sin. That's the key to understanding the modern left. Whatever they're accusing you of doing, they are doing themselves but more enthusiastically. And that's definitely the story of Justin Trudeau. Tucker Carlson
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Web Search:

All times are GMT -5. The time now is 03:36 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.