Shop Floor Talk  

Go Back   Shop Floor Talk > Welding and Metalworking Forums > Fabrication

SFT Search:   
Reply
 
Thread Tools Display Modes
  #21  
Old 10-29-2020, 12:36 PM
milomilo's Avatar
milomilo milomilo is offline
Auction Addict
 
Join Date: May 2010
Location: Wheatland, Wyoming
Posts: 16,846
Default

Last pics.
Attached Thumbnails
Click image for larger version

Name:	PIC222.JPG
Views:	54
Size:	98.8 KB
ID:	158208   Click image for larger version

Name:	PIC223.JPG
Views:	49
Size:	106.8 KB
ID:	158209  
__________________
Chris

The question isn't who is going to let me; it's who is going to stop me.
Reply With Quote
  #22  
Old 10-29-2020, 02:31 PM
vagem55 vagem55 is offline
Newbie
 
Join Date: Oct 2020
Location: Virginia
Posts: 8
Default

That's amazing that you did all that.
I greatly appreciate it.
I hope I have everything but the arm, but I will verify from the other amazing shots you sent.
I can probably figure out the size of the hole in the center mount piece (8583) and the flat size from looking at where it mounts on mine.
What size is the square stock (2276K) and is yours not tapered down like the one in the manual?
I can probably figure out the end piece that actually contacts the tire/rim (8582K) from that.
Thank you again.
You are amazing!
Reply With Quote
  #23  
Old 10-29-2020, 02:39 PM
vagem55 vagem55 is offline
Newbie
 
Join Date: Oct 2020
Location: Virginia
Posts: 8
Default Bishman 880 Tire change Mount/Demount parts

Sorry, just saw your first post that said it was a 7/8 bar.
Guess I should have opened my eyes instead of my ... fingers?
Thanks again.
Reply With Quote
  #24  
Old 10-29-2020, 03:01 PM
mccutter's Avatar
mccutter mccutter is offline
Post Fiend
 
Join Date: Mar 2006
Location: Central Florida
Posts: 9,459
Default

Quote:
Originally Posted by milomilo View Post
More pics.
The Bishman Boyz appreciate you taking the time to take pics with your potato--maybe one of them can show you how to set the date and time... And maybe resolution?
__________________

TA Arcmaster 185 w/tig/stick kit
MillerMatic 252 w/3rd gen 30A
MM140 w/o AS, w/CO2
Hobart (Miller) 625 plasma
Hobart 250ci plasma
Victor O/A (always ready, but bored)
TA 95 lunchbox w/tig
45ACP Black Talons for those stubborn jobs...
Reply With Quote
  #25  
Old 10-29-2020, 04:13 PM
milomilo's Avatar
milomilo milomilo is offline
Auction Addict
 
Join Date: May 2010
Location: Wheatland, Wyoming
Posts: 16,846
Default

Quote:
Originally Posted by mccutter View Post
The Bishman Boyz appreciate you taking the time to take pics with your potato--maybe one of them can show you how to set the date and time... And maybe resolution?
I have dicked with the resolution to no avail. There are several settings and I do not know which one would be the right one. I can do the date and time.
__________________
Chris

The question isn't who is going to let me; it's who is going to stop me.
Reply With Quote
  #26  
Old 11-03-2020, 11:23 AM
Vic-Mn. Vic-Mn. is offline
Newbie
 
Join Date: Oct 2020
Location: E central Mn
Posts: 1
Smile Tire Machine tools

New guy here. Thanks for pictures of the tire machine tools. Have been using home made tools on on an identical machine for 20 years. A past attempt at copying the original mounting arm was not successful. With the new detailed pictures I will try again. Thanks for sharing the pictures. Vic
Reply With Quote
  #27  
Old 11-04-2020, 12:39 PM
milomilo's Avatar
milomilo milomilo is offline
Auction Addict
 
Join Date: May 2010
Location: Wheatland, Wyoming
Posts: 16,846
Default

Here are some more details of the 8553 arm.

Materials:

7/8"x 11 1/2" square bar with 5/16" diameter hole at 10" from the end of the bar. My bar has 1" rabbit where the spring lets the bar swivel. Not sure this really makes it work any better or not.

The gusset welded to the half round is 2 1/2" long and 1/8" thick and 1 1/2" wide.

The U channel is 4" long and 3/16" thick.

The half round is 3/4" wide and 7" long. It will need bending to match the angles on the pics.

The piece the slides onto the spindle (8553) is cast steel, It is 3"long x 1 1/2" ID x 2 1/2" OD. The retangular portion is 1 3/4" x 2 1/4" with a 7/8" square hole for the bar ad a 1/2" hole for the lock screw. The lock screw is 1/2" x 2" with a round knurled head. It screws into a 1/2" square nut inside the rectangular section. Complicated piece.
Attached Thumbnails
Click image for larger version

Name:	PIC234.JPG
Views:	23
Size:	85.8 KB
ID:	158345   Click image for larger version

Name:	PIC235.JPG
Views:	28
Size:	98.8 KB
ID:	158346   Click image for larger version

Name:	PIC236.JPG
Views:	29
Size:	85.8 KB
ID:	158347   Click image for larger version

Name:	PIC237.JPG
Views:	30
Size:	89.8 KB
ID:	158348   Click image for larger version

Name:	PIC238.jpg
Views:	25
Size:	202.8 KB
ID:	158349  

__________________
Chris

The question isn't who is going to let me; it's who is going to stop me.
Reply With Quote
  #28  
Old 11-04-2020, 12:40 PM
milomilo's Avatar
milomilo milomilo is offline
Auction Addict
 
Join Date: May 2010
Location: Wheatland, Wyoming
Posts: 16,846
Default

Last pic.
Attached Thumbnails
Click image for larger version

Name:	PIC239.jpg
Views:	40
Size:	210.0 KB
ID:	158350  
__________________
Chris

The question isn't who is going to let me; it's who is going to stop me.
Reply With Quote
  #29  
Old 11-04-2020, 06:47 PM
vagem55 vagem55 is offline
Newbie
 
Join Date: Oct 2020
Location: Virginia
Posts: 8
Default Bishman 880 Tire change Mount/Demount parts

Quote:
Originally Posted by milomilo View Post
Here are some more details of the 8553 arm.

Materials:

7/8"x 11 1/2" square bar with 5/16" diameter hole at 10" from the end of the bar. My bar has 1" rabbit where the spring lets the bar swivel. Not sure this really makes it work any better or not.

The gusset welded to the half round is 2 1/2" long and 1/8" thick and 1 1/2" wide.

The U channel is 4" long and 3/16" thick.

The half round is 3/4" wide and 7" long. It will need bending to match the angles on the pics.

The piece the slides onto the spindle (8553) is cast steel, It is 3"long x 1 1/2" ID x 2 1/2" OD. The rectangular portion is 1 3/4" x 2 1/4" with a 7/8" square hole for the bar ad a 1/2" hole for the lock screw. The lock screw is 1/2" x 2" with a round knurled head. It screws into a 1/2" square nut inside the rectangular section. Complicated piece.
Thank you so much for all the work you went through to describe this so thoroughly.
Truly awesome!
Reply With Quote
  #30  
Old 11-04-2020, 10:50 PM
milomilo's Avatar
milomilo milomilo is offline
Auction Addict
 
Join Date: May 2010
Location: Wheatland, Wyoming
Posts: 16,846
Default

Quote:
Originally Posted by vagem55 View Post
Thank you so much for all the work you went through to describe this so thoroughly.
Truly awesome!
Hope it helps you out. Make sure you post if you decide to make the arm. Others may benefit from your efforts.
__________________
Chris

The question isn't who is going to let me; it's who is going to stop me.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Web Search:

All times are GMT -5. The time now is 10:04 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.