|
|
#1
06-13-2020, 08:01 AM
|
||||
|
||||
Combo Anvil & Vise....
|
|
#2
06-13-2020, 08:07 AM
|
||||
|
||||
|
The original combo tool for the guy with no room .Even looks lightly used .
|
|
#3
06-13-2020, 10:15 AM
|
||||
|
||||
|
Believe it or not I have seen one of those--guy down the road has one. It is a bit of a space saver for sure. I saved one pic so that when the ad dies people will know what we're talking about...
__________________
Keith Measure twice and cut once...or...wait, was that the other way around?
|
|
#5
06-17-2020, 06:47 AM
|
|||
|
|||
|
I’m fairly sure I have one too although i haven’t seen it in years and don’t recall where it is. I do remember it was not in good condition and seized.
__________________
With the amount of energy that is being consumed I expect most people on earth should be living in Utopia. And now this? It started hitting the fan in the 1950's https://m.youtube.com/watch?v=nRnNDkHb0MU A technologically advanced society would teach their children how to start a fire by rubbing two sticks together before teaching them how to use a lighter. If you are not having fun then you are doing it wrong.
|
|
#6
07-11-2020, 11:15 AM
|
||||
|
||||
|
I have one! The bottom of the main body is hollow so you definitely do not want to do a lot of hammering on it.
Sent from my iPhone using ShopFloorTalk
__________________
Brian You don't know what you don't know.  "It's what you learn after you know it all that counts." John Wooden 
|
|
#7
07-14-2020, 08:10 AM
|
||||
|
||||
|
Hmm....drawing from another thread....someone could make one, using 2" thick
steel for the "anvil" back instead of 1/2" plate normally there.
|
|
#8
07-21-2020, 07:48 AM
|
||||
|
||||
|
A person sure could make one that is more durable..
Very light duty only. if one wants them to last. There is a combo tool much like this but has a forge, blower, grinder and vise built in.. I don't own one nor have a photo but they are kinda neat to look at.
__________________
_________________ Jennifer If I defend myself I am attacked. My meaningless thoughts are showing me a meaningless world. My attack thoughts are attacking my invulnerability. I'd like to think of something smart, but I don't want to hurt myself. My google+ page DoALL 36" Another Johnson model J Project Lathe? Maybe..... 1958 SBL 13" Yeti Esseti Aka running welder on 3phase. https://www.shopfloortalk.com/forums...860#post766860
|
|
#9
07-21-2020, 09:50 AM
|
||||
|
||||
|
Quote:
Start with 3" thick oxy cut plate for the top surface, weld at least 1" thick side plates (to form the tunnel). Use very heavy acme thread rod (maybe 1 1/4") and make it run in 4" x 6" box tube (IIRC you can get that in 1/2" thick wall). OR ! use a 10 ton enerpac style cylinder inside the box tube (HF sells these) Make jaws milled into end of the 3" plate, so jaws are flush with anvil surface (unlike the normal vices) Like the one Keith pictured. Would you use a hardfacing rod on the anvil area ?
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
