Shop Floor Talk  

Go Back   Shop Floor Talk > Welding and Metalworking Forums > Shop & Safety

SFT Search:   
Reply
 
Thread Tools Display Modes
  #1  
Old 08-19-2019, 10:47 PM
Dr Dean's Avatar
Dr Dean Dr Dean is offline
no bull it's huge!
 
Join Date: Dec 2004
Location: Oakland Ia
Posts: 1,778
Default Carbide Burr substitute?

I had to break out the die grinder with a carbide Burr today to egg out some holes on a combine today. I was rapidly reminded of the fact that the burr was a creation of Satin himself for all the little metal slivers everywhere. The best thing I have found to get them off my skin and gloves is a blow gun with compressed air. That really isn't the problem, the trouble is all the slivers everywhere. Any suggestions for something else to use in the die grinder that is effective as the burr but with out the satanic residue.

Sent from my Pixel 3 XL using ShopFloorTalk mobile app
__________________
The person who said "no guts no glory" is probably dead.
There is no such thing as too much ammo.....the real problem is a target deficency.
Reply With Quote
  #2  
Old 08-19-2019, 11:00 PM
Ironman's Avatar
Ironman Ironman is online now
Iron Modification Investigator
 
Join Date: Feb 2008
Location: Warburg, Alberta, Canada
Posts: 13,699
Default

Nope, nothing else cuts at that speed. I am always having my wife pull steel slivers from milling or die grinding. Those two machines know how to make a wicked chip.
__________________
Gerry
You got freedom of speech, if you don't say too much.
Aaron Neville

"I must abide by my core values, my ethical responsibilities and constitutional obligations. There can be a cost to acting on one’s principles, but there is a bigger cost to abandoning them.” Jane Philpott
Reply With Quote
  #3  
Old 08-20-2019, 01:13 AM
arizonian's Avatar
arizonian arizonian is offline
Elite Member
 
Join Date: Jul 2007
Location: Tucson, Arizona
Posts: 1,254
Default

Not quite the same, but a bridge reamer might be what you need if you have the headroom.

Bridge reamer
__________________
Bill in sunny Tucson

I believe in gun control.

Gun Control: The ability to consistently hit what you are aiming at.

Weldor by choice, engineer by necessity.
Reply With Quote
  #4  
Old 08-20-2019, 01:36 AM
LKeithR's Avatar
LKeithR LKeithR is offline
Hey...wait...is there a prize?
 
Join Date: Aug 2011
Location: Langley, B.C.
Posts: 5,050
Default

Quote:
Originally Posted by arizonian View Post
...Not quite the same, but a bridge reamer might be what you need if you have the headroom...
Yeah, if you're opening up or "aligning" existing holes a bridge reamer is the way to go if you've got room. They make stubby ones with hex ends that can get into some pretty tight spaces. I've even used a zip cutter to remove some of the taper to make them shorter...
Attached Thumbnails
Click image for larger version

Name:	Bridge Reamer.jpg
Views:	44
Size:	54.7 KB
ID:	151890  
__________________
Keith

Measure twice and cut once...or...wait, was that the other way around?
Reply With Quote
  #5  
Old 08-20-2019, 09:02 AM
digger doug's Avatar
digger doug digger doug is offline
Not to be used as a Flotation Device
 
Join Date: Jan 2008
Location: NW Pa
Posts: 11,685
Default

Ever notice the jobs where the slivers come back at you the worst (like reaching inside a large pipe), are always scheduled in the morning ?

so your itchy & scratchy all day.

Try a grinding wheel if you can get one in there, but they are much slower
cutting.

Have you tried this ? :
https://www.harborfreight.com/air-file-1704.html
Reply With Quote
  #6  
Old 08-20-2019, 03:27 PM
Walker's Avatar
Walker Walker is offline
Standard of Excellence
 
Join Date: Aug 2004
Location: Cave Creek AZ
Posts: 4,391
Default

I have had burrs that put out such nasty shavings that I put it on the bench grinder before I threw it in the scrap bin so that no one else would suffer. Most put out tolerable shavings. Tape a shop vac hose near the hole and it collects a big portion of them.
__________________
Walker
Chief slag chipper and floor sweeper, Ironwood Artistic
Reply With Quote
  #7  
Old 08-24-2019, 06:38 PM
MotorDoctor's Avatar
MotorDoctor MotorDoctor is offline
Karma Avenger
 
Join Date: Jun 2004
Location: NYC
Posts: 4,759
Default

I stick a nice big magnet right next to where I'm cutting and that collects a lot of the splinters. Machining wax helps a little too but if you're moving a lot of metal, it just melts and makes the splinters gooey.
__________________
Director of Sarcasm (by appointment) Director of Innuendo (by suggestion)
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Web Search:

All times are GMT -5. The time now is 09:46 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.