Anther Trailer Build

[milomilo]

This is the trailer I got from a neighbor that was moving free. Pretty light unit but will be handy some times to have a flatbed to pull around the place with the Polaris Ranger or a 4 wheeler. Tires are ST's in good shape. Tore off the plywood rotted deck. It will get a 2x6 deck. Likely will make removable side boards.

Have to add and redo some cross members. Some were 2" out of square with the frame. Someone added grease zerks to the axe dust caps which blew out the inner seals. Have to disassemble, repack bearings and get new seals. The front tongue was bent on one side due to jackknifing the trailer. Some heat and clamps made it right now. The 1 7/8" hitch is twisted so will get a new 2" hitch.

Many pigeon shit welds were ground out and re-welded. A new drop receiver hitch will be need to be made to adjust the hitch so it fits on the lower height of the Ranger.

[milomilo]

More pics.

[digr]

Looking good!! What kind of clams did you use? Must be hard to come by in your neck of the woods.

[Whitetrash]

Originally Posted by digr

Looking good!! What kind of clams did you use? Must be hard to come by in your neck of the woods.

High Plains "Windeater Clams"

[milomilo]

Originally Posted by digr

Looking good!! What kind of clams did you use? Must be hard to come by in your neck of the woods.

Thanks. Fixed.

[camdigger]

Just curious Chris.... My Polaris Sportsman has a 1 1/2" receiver. Hitch adaptors are commercially available. Do the Ranger side by sides not have them? ( I never thought to look at the one I did the fall roundup with a month ago). It would save a lot of work if you could use an of the shelf hitch adaptor.

[milomilo]

Originally Posted by camdigger

Just curious Chris.... My Polaris Sportsman has a 1 1/2" receiver. Hitch adaptors are commercially available. Do the Ranger side by sides not have them? ( I never thought to look at the one I did the fall roundup with a month ago). It would save a lot of work if you could use an of the shelf hitch adaptor.

The 4 wheeler's and the UTV all have receiver hitches. The 4 wheeler's are much lower than a standard p/u and the utv is only half as much lower than a p/u. Expect the Ranger will be used most with this trailer. Looks like a one foot higher hitch on the Ranger.

[greywynd]

Looks good Chris, should be more than solid enough for use around the place.


Sent from my iPhone using Tapatalk

[toprecycler]

Soon you will have a trailer for every vehicle. Then you can start adding hitches to the back of them and start hauling tandems!


Sent from my iPhone using ShopFloorTalk

[milomilo]

Originally Posted by toprecycler

Soon you will have a trailer for every vehicle. Then you can start adding hitches to the back of them and start hauling tandems!


Sent from my iPhone using ShopFloorTalk

Seems I have a fetish for trailers as well as grinders.