Shop Floor Talk  

Go Back   Shop Floor Talk > Welding and Metalworking Forums > Mechanical & Electrical

 
 
SFT Search:
Reply
 
Thread Tools Display Modes
  #1  
Old 01-24-2024, 07:09 AM
VW cat VW cat is offline
Senior Member
 
Join Date: Feb 2006
Location: Canada
Posts: 394
Default Water heater anode question

I'm replacing my leaking 4 year old 40 gallon water heater with a similar GSW unit. I removed the aluminum anode from the old one, so I could heat it with lines from an outdoor furnace heat exchanger. The dealer back then said that's the only way it can be done.

I got the idea, why not cut the threaded end off the anode and just drop it in the tank. Will it work, or is it better to suspend ,allowing water flow past?
Reply With Quote
  #2  
Old 01-24-2024, 02:24 PM
GWIZ's Avatar
GWIZ GWIZ is offline
SFT Historian
 
Join Date: Feb 2006
Location: USA
Posts: 7,588
Default

Has to do with electron flow direction and needs to be attached to the tank for it to work.

Most water heater Tanks are guaranteed for 5 to 10 years, you should call the factory with a serial number for a replacement.
__________________
*
*
The factory of the future will have only two employees, a man and a dog. The man will be there to feed the dog. The dog will be there to keep the man from touching the equipment. ~Warren G. Bennis

Last edited by GWIZ; 01-24-2024 at 02:31 PM.
Reply With Quote
  #3  
Old 01-24-2024, 08:21 PM
toprecycler's Avatar
toprecycler toprecycler is offline
Administrator
 
Join Date: Jan 2009
Location: Petoskey, Michigan
Posts: 6,966
Default

I’ve seen hot water heaters with side arm heaters from wood boilers. Pull bottom drain valve out and top relief valve. Replace with tees, to keep drain valves and relief valve in place. Connect the two tees together, with a heat exchanger made from a larger piece of copper pipe with a smaller one inside that connects the top and bottom tees into the water heater.

I tried to draw a picture, and included a couple pictures of a set up in a house that I just switched out the wood boilers last December.


Click image for larger version

Name:	IMG_1246.jpg
Views:	126
Size:	72.0 KB
ID:	169949
Click image for larger version

Name:	IMG_0512.jpg
Views:	138
Size:	61.0 KB
ID:	169950
Click image for larger version

Name:	IMG_0279.jpg
Views:	137
Size:	74.7 KB
ID:	169951


Sent from my iPhone using Tapatalk
__________________
Brian

You don't know what you don't know.

"It's what you learn after you know it all that counts." John Wooden
Reply With Quote
  #4  
Old 01-25-2024, 07:16 PM
VW cat VW cat is offline
Senior Member
 
Join Date: Feb 2006
Location: Canada
Posts: 394
Default

I never thought about plumbing it that way. My heat exchanger is 5' long. I'm guessing it would heat water just as efficiently from the relief valve port, as off a top port, where the anode is...
Reply With Quote
  #5  
Old 01-25-2024, 07:24 PM
GWIZ's Avatar
GWIZ GWIZ is offline
SFT Historian
 
Join Date: Feb 2006
Location: USA
Posts: 7,588
Default

IIRC, the cold water inlet/input has a long tube that forces the cold water to the bottom of the tank closer to the burner.

If you look in the cold/hot threaded holes you should see the tube.
__________________
*
*
The factory of the future will have only two employees, a man and a dog. The man will be there to feed the dog. The dog will be there to keep the man from touching the equipment. ~Warren G. Bennis
Reply With Quote
  #6  
Old 01-25-2024, 07:49 PM
VW cat VW cat is offline
Senior Member
 
Join Date: Feb 2006
Location: Canada
Posts: 394
Default

I'm using the model with the cold intake at the bottom. I'm not sure why, I guess because the first one 45 years ago was like that. I'm always afraid the grand kids will run into it with their pedal cars.
Attached Thumbnails
Click image for larger version

Name:	Heater.jpg
Views:	110
Size:	65.1 KB
ID:	169953  
Reply With Quote
  #7  
Old 01-26-2024, 01:14 AM
GWIZ's Avatar
GWIZ GWIZ is offline
SFT Historian
 
Join Date: Feb 2006
Location: USA
Posts: 7,588
Default

Quote:
Originally Posted by VW cat View Post
I'm using the model with the cold intake at the bottom. I'm not sure why,
Just noting my information is more on gas water heaters don't know much about electric ones.

about 2 years ago I was in Lowe's pricing Gas water heaters there were some priced about $200 cheaper but were tagged "not for home use or something to that wording".
I asked and that person stated the inlet is at the bottom and for homes the inlets were at the top.
IIRC,
the bottom inlets are for maybe mobile homes or RV's where the water supply lines come in.

Slab homes run the pipes in the attic so they connect from the top.
__________________
*
*
The factory of the future will have only two employees, a man and a dog. The man will be there to feed the dog. The dog will be there to keep the man from touching the equipment. ~Warren G. Bennis
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Web Search:

All times are GMT -5. The time now is 07:27 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.