Shop Floor Talk  

Go Back   Shop Floor Talk > Welding and Metalworking Forums > Fabrication

SFT Search:   
Thread Tools Display Modes
Old 05-08-2021, 01:32 AM
clive's Avatar
clive clive is offline
Join Date: May 2007
Location: Western Australia
Posts: 2,112
Default belt sander

I’m in the early stage of building a belt sander, I’m wondering what grit is the most useful? Any help appreciated.
It's So Easy
Reply With Quote
Old 05-08-2021, 02:19 AM
LKeithR's Avatar
LKeithR LKeithR is offline there a prize?
Join Date: Aug 2011
Location: Langley, B.C.
Posts: 5,606

If you're working with steel there's no point in using anything finer than 36 grit. That's what I use 99 per cent of the time. Once in a while if I've got something extra heavy to sand I'll throw on a 24 grit belt but the 36 works fine for most stuff. Anything finer takes too long to cut. The 36 grit actually only stays sharp for a while and then you've got a finer belt anyway.

I guess if you were trying to do some finish sanding--like prep for polishing before plating--a finer grit might be useful but for welding prep and general fabrication shaping 36 grit works great...

The nice thing is that it's easy to experiment with different grits and find what works for you.

And by the way, the blue Zirconia belts will give you the longest life...

Measure twice and cut once...or...wait, was that the other way around?
Reply With Quote
Old 05-08-2021, 08:14 AM
Lew Hartswick Lew Hartswick is offline
Elite Member
Join Date: May 2008
Location: Albuquerque NM
Posts: 4,587

Originally Posted by LKeithR View Post

And by the way, the blue Zirconia belts will give you the longest life...
Boy and How!!! My first use of one of them was about 20 years ago when I started to volunteer at the high school shop. there was one on the 2" belt sander there and that was a "revelation". I was use to the red-brown ones.
Reply With Quote
Old 05-08-2021, 08:39 AM
dubby's Avatar
dubby dubby is offline
Twice the size--half the man
Join Date: Apr 2006
Location: Lubbock, TX
Posts: 9,936

It really does depend on what you're sanding. Most all of my work is done in plastic and aluminum, so I run much finer grits on my belt/disc combo machine. I run a 50 grit on the little HF 1" belt grinder though to really hog material off quick, then follow it up with 150 on the 4x36 belt, and 220 on the disc to debur and make fine tweaks to the edges.
I've always had more time than money.

Wade's Custom Kydex
Reply With Quote
Old 05-08-2021, 11:37 AM
Matt Shade's Avatar
Matt Shade Matt Shade is offline
Made From Scratch
Join Date: Jan 2007
Location: Ohio
Posts: 3,296

What size belt are you planning to run?

Is this actually a belt sander, or is this a belt grinder?

What do you intend to do with it the most?

I have a 2x72 inch grinder and it mainly has a 36 grit belt on it, but I keep ceramic belts in 36, 80, 120, and 220, and usually have aluminum oxide belts in 320 and 400 grit as well.

For general fabricating a 36 grit belt is perfect for weld prep, radiusing corners and general grinding.

If you want to dress up points on cold chisels, wood working tools and stuff like that and you can do that with a 36 grit belt at 6000sfpm you are a better man than me. I like 80 or 120 for more intricate tasks. The ceramic belts still cut extremely fast. The 220 to 400 range is mainly for polishing knife blades.

If you are worried about finish quality it is worth noting that even though a dull belt cuts slower, its still leaves scratches in whatever its grit is. A worn 36 grit belt may cut as slow as a 120 grit belt, but the scratches it leaves behind are still 36 grit ugly.

I also have a 4x36 inch sander that runs much slower than the big grinder. I keep 36 grit belts for it for flatting things, or hogging out the basic shape on knife handles, but most of the time it has an 80 grit belt on it for more finish type work.

I buy ceramic belts whenever I can. In 2x72 the 3M cubitron belts have unbelievable life. Its hard to find ceramic in 4x36 but they do outperform aluminum oxide when you can find them.
Handcrafted Leather
Reply With Quote
Old 05-10-2021, 01:29 AM
clive's Avatar
clive clive is offline
Join Date: May 2007
Location: Western Australia
Posts: 2,112

Thank for the replies, it will just be for steel, as we are metric I plan on using a 50 x 2000 belt.
It's So Easy
Reply With Quote
Old 06-05-2021, 05:18 AM
toprecycler's Avatar
toprecycler toprecycler is offline
Join Date: Jan 2009
Location: Petoskey, Michigan
Posts: 6,131

Shawn, nice build. Sounds like you learned a lot. And you got a useable tool.

I would call the process you used to mount the pipe on the motor pulley “heat Shrink”. I’m sure there are other terms used by others.

Sent from my iPhone using Tapatalk

You don't know what you don't know.

"It's what you learn after you know it all that counts." John Wooden
Reply With Quote
Old 06-05-2021, 09:11 AM
Ironman's Avatar
Ironman Ironman is online now
Iron Modification Investigator
Join Date: Feb 2008
Location: Warburg, Alberta, Canada
Posts: 16,436

Nice build, maybe someday I will finish my belt sander project
You got freedom of speech, if you don't say too much.
Aaron Neville.

When a liberal screams racism, you can bet they were also born with white skin.
“The word ‘racism’ is like ketchup. It can be put on practically anything — and demanding evidence makes you a ‘racist’.”
Thomas Sowell
Reply With Quote
Old 06-05-2021, 10:46 AM
BukitCase BukitCase is offline
Elite Member
Join Date: Feb 2013
Location: Lost in Oregon
Posts: 1,231

"maybe someday I will finish my belt sander project"

Gerry, if I EVER find "tuits" for sale on Amazon, my next credit card bill will be a few THOUSAND$$$ higher ... Steve
Reply With Quote
Old 06-14-2021, 07:50 PM
racer-john racer-john is offline
Join Date: Jan 2010
Location: Newmarket ON Canada
Posts: 53
Default belt sander

"I milled the flywheel down on the motor to accomodate a piece of 6" pipe (cleaned up )"

Nice work Shawn. I need one of these, one day. Lol.
Lathe Grizzly 9 x 19, Century 110V Mig welder, O/A welder, hammers, dollies, 10 speed Drill Press, multi drills, grinders, both corded and 20v battery.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Web Search:

All times are GMT -5. The time now is 01:36 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.