Shop Floor Talk  

Go Back   Shop Floor Talk > Welding and Metalworking Forums > Machining
Reload this Page Hallelujah
Register FAQ Members List Social Groups Calendar Search Today's Posts Mark Forums Read

SFT Search:   
Reply
Page 1 of 7 1 23 Last »
 
Thread Tools Display Modes
  #1  
Old 11-28-2018, 06:50 PM
milomilo's Avatar
milomilo milomilo is offline
Auction Addict
  
Join Date: May 2010
Location: Wheatland, Wyoming
Posts: 14,409
Default Hallelujah
Finally got me a mill. It is a Grizzly G1006. Has a 2hp motor. Goes for 50-2100 RPM. Came with set (12) of R8 collets, about 15 end mills, hold down set and a 6" vise and a decent home made steel table. Cost me $500 for the package. It was all a filthy mess. Looks like the owner never cleaned it while he owned it. Don't think he used it all that much as 5 of the collets were still in the original wrappers.

Has a few small divots in the table but nothing large. Vise was in the same shape. Had a lot of surface rust which came off easily with emery and a random orbit sander. Found out after cleaning it it is a Browne & Sharp vise. Nice surprise. The table gib adjustment screw is missing so now to search and see if I can find one. One table lock down screw is missing.

Bubba went with me to Cheyenne to help get it loaded. Estimating is weighs around 5-6 hundred lbs. We plugged it in with the belts off and the motor runs smooth as glass. One belt needs replaced. The top end is at Bubba's place till it gets all cleaned up.

Pics are before cleaning, except for the table. More pics tomorrow after cleaning and some assembly. It is all manual drive, no DRO (yet).
Attached Thumbnails
Click image for larger version Name: SAM_2324.jpg Views: 122 Size: 181.5 KB ID: 148284   Click image for larger version Name: SAM_2320.jpg Views: 119 Size: 203.9 KB ID: 148285   Click image for larger version Name: SAM_2321.jpg Views: 128 Size: 205.2 KB ID: 148286   Click image for larger version Name: SAM_2322.jpg Views: 123 Size: 204.1 KB ID: 148287  
__________________
Chris

You want a friend in Washington? Get a dog.
Harry S. Truman
Last edited by milomilo; 11-28-2018 at 06:56 PM.
Reply With Quote
  #2  
Old 11-28-2018, 06:53 PM
milomilo's Avatar
milomilo milomilo is offline
Auction Addict
  
Join Date: May 2010
Location: Wheatland, Wyoming
Posts: 14,409
Default
More pics.
Attached Thumbnails
Click image for larger version Name: SAM_2323.jpg Views: 147 Size: 192.0 KB ID: 148288   Click image for larger version Name: SAM_2325.jpg Views: 137 Size: 189.3 KB ID: 148289   Click image for larger version Name: SAM_2328.jpg Views: 133 Size: 187.2 KB ID: 148290   Click image for larger version Name: SAM_2329.jpg Views: 131 Size: 191.5 KB ID: 148291   Click image for larger version Name: SAM_2330.jpg Views: 124 Size: 190.8 KB ID: 148292  

__________________
Chris

You want a friend in Washington? Get a dog.
Harry S. Truman
Reply With Quote
  #3  
Old 11-28-2018, 07:34 PM
Whitetrash's Avatar
Whitetrash Whitetrash is offline
Elite Member
  
Join Date: Mar 2009
Location: Estes Park, CO [Around 8000 Ft. Elv.]
Posts: 2,710
Default
Very Cool
__________________
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
Reply With Quote
  #4  
Old 11-28-2018, 07:44 PM
digger doug's Avatar
digger doug digger doug is offline
Not to be used as a Flotation Device
  
Join Date: Jan 2008
Location: NW Pa
Posts: 11,333
Default
You could.....powerwash it.

Gasp !

No soap, no steam, get right in there with the nozzle 2" away and let it rip.

As soon as you get it clean, air nozzle it dry, and apply some WD-40
or other light rust prevent.
Reply With Quote
  #5  
Old 11-28-2018, 07:59 PM
digr's Avatar
digr digr is offline
The Real Deal
  
Join Date: Apr 2005
Location: Duluth MN
Posts: 7,794
Default
Nice! its a slippery slope
__________________
Drawing by Smartdraw
Reply With Quote
  #6  
Old 11-28-2018, 08:16 PM
Lu47Dan's Avatar
Lu47Dan Lu47Dan is offline
Connoisseur of Old Iron
  
Join Date: Mar 2006
Location: N/W Pa.
Posts: 5,962
Default
Yep , nice score, Chris. But.........
Once you get sometime on it, you will be wanting, a DRO, drives for the table, a rotary table, and the beat goes on... .
Congratulations.
Dan.
__________________
Tools to Men are like Shoes to Women , you can never have too many !!
Used diesel engines are an adventure anyway you look at them !!
Miller XMT-304 Multiprocess
Miller 10-E Wire Feeder
Miller Spectrum 2050 Plasma Cutter
Hobart AC/DC stick welder
Hobart 175 Mig
Craftsman O/A set
Turbo torch and B-tank
Reply With Quote
  #7  
Old 11-28-2018, 08:27 PM
milomilo's Avatar
milomilo milomilo is offline
Auction Addict
  
Join Date: May 2010
Location: Wheatland, Wyoming
Posts: 14,409
Default
Quote:
Originally Posted by digr View Post
Nice! its a slippery slope
Yes, discretion may be hard to control.

Quote:
Originally Posted by Lu47Dan View Post
Yep , nice score, Chris. But.........
Once you get sometime on it, you will be wanting, a DRO, drives for the table, a rotary table, and the beat goes on... .
Congratulations.
Dan.
I can see the future, and it is not cheap.
__________________
Chris

You want a friend in Washington? Get a dog.
Harry S. Truman
Reply With Quote
  #8  
Old 11-28-2018, 08:42 PM
platypus20's Avatar
platypus20 platypus20 is offline
Boiler God
  
Join Date: Aug 2007
Location: camillus, ny (syracuse)
Posts: 9,453
Default
Damn !!
__________________
jack
Reply With Quote
  #9  
Old 11-28-2018, 08:45 PM
MetalWolf's Avatar
MetalWolf MetalWolf is online now
Lubrication Consultant
  
Join Date: Jan 2011
Location: LaVernia,Tx.
Posts: 2,800
Default
Chris..... what are your collet sizes is it a set or in between sizes...
oh an if this deserves a "You Suck!" here it is...
__________________
MetalWolf, AKA---- Metallic Shapeshifter-----

I Have Only One Wish, To Achieve "Pura Vida" In All That I Do!
Reply With Quote
  #10  
Old 11-28-2018, 09:10 PM
milomilo's Avatar
milomilo milomilo is offline
Auction Addict
  
Join Date: May 2010
Location: Wheatland, Wyoming
Posts: 14,409
Default
Quote:
Originally Posted by MetalWolf View Post
Chris..... what are your collet sizes is it a set or in between sizes...
oh an if this deserves a "You Suck!" here it is...
I have not laid them out to check yet. I did see a 7/8", 3/8" and 1/2" while loading them up. I expect they are by sixteenths. I will check tomorrow. I did pul up a manual and was surprised to see that the fasteners are all SAE instead of metric. The missing gib screw is 5/16-18 thread. Should be easy to find one now. Going to pull the belts tomorrow to get some numbers.
__________________
Chris

You want a friend in Washington? Get a dog.
Harry S. Truman
Reply With Quote
Reply
Page 1 of 7 1 23 Last »

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Web Search:

All times are GMT -5. The time now is 08:49 PM.

Contact Us - Shop Floor Talk - Archive - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.