#1
|
||||
|
||||
Bronze brazing questioni
I have a broken iron casting needing repair. The broken piece is long gone. I have bashed up a patch from similar thickness scrap steel. Due to the nature of cast iron and dissimilar metals, I think I need to do a braze repair. Many braze repairs I see have a lot of built up re enforcement over the seam. How much is truly necessary?
I have done a pass down both sides that look OK, but have little crown to the bead (1/16” +) The materials are both 3/16” thick, and one bead is over 3” long, while the other is 1” long.
__________________
Design to 0.001", measure to 1/32", cut with an axe, grind to fit.. |
Thread Tools | |
Display Modes | |
|
|