Shop Floor Talk  

Go Back   Shop Floor Talk > Welding and Metalworking Forums > Fabrication

SFT Search:
Thread Tools Display Modes
Old 10-25-2013, 07:41 PM
packetfire packetfire is offline
Join Date: Oct 2013
Location: Northeastern USA
Posts: 1
Default Novice with a Uni-Punch and a Habor Freight 6-ton press

I am not a metal worker, but I have a need to punch some aluminum ranging from 1/16th to 3/8ths with a small shape-punch, total punch circumference less than 1 inch. I will be punching hundreds, perhaps thousands of holes.

So, I have ordered a used Uni-Punch AJ 1 1/2-inch rig, and some off-the-shelf tooling is being provided by a vendor who knows Uni-Punches well.

This leaves something to apply some pressure. I did the usual math, and 6 tons is likely overkill, and the Harbor Freight 6-ton press was on sale for $69.00.

A few things that would be nice would include:

a) Some way to rig a pulley, foot pedal and spring return for the bottle-jack handle that applies the pressure.

b) Maybe another foot-pedal to operate the release valve on the bottle jack?

c) Some way to assemble the press so that it remains "square", for example, has any one assembled the thing, squared it up, and then drilled holes for cotter pins to keep the various joints from slipping out of "square"?

d) Or should the Harbor Freight press be returned as "useless", and something else be purchased in its place?

Can anyone point me in the right direction?
Reply With Quote
Old 10-25-2013, 07:49 PM
LKeithR's Avatar
LKeithR LKeithR is offline there a prize?
Join Date: Aug 2011
Location: Langley, B.C.
Posts: 5,737

Your big thing is going to be time. If you really do end up punching thousands of holes pulling that jack handle is going to get old in a hurry. Your tonnage is low so some sort of air over hydraulic power unit would probably be a good choice...

Measure twice and cut once...or...wait, was that the other way around?
Reply With Quote
Old 10-25-2013, 07:52 PM
GWIZ's Avatar
GWIZ GWIZ is offline
SFT Historian
Join Date: Feb 2006
Location: USA
Posts: 7,602

Welcome to the site.

Cant say if it will fit in the press you have, HF should also have Air operated bottle-jacks you may want to consider.

Then you also need an air compressor.
The factory of the future will have only two employees, a man and a dog. The man will be there to feed the dog. The dog will be there to keep the man from touching the equipment. ~Warren G. Bennis
Reply With Quote
Old 10-25-2013, 09:10 PM
akabull's Avatar
akabull akabull is offline
Join Date: Jun 2007
Location: Albany Township, Maine
Posts: 2,238
Send a message via MSN to akabull

I'd return the 6 ton and buy the 20 ton floor unit and a 20 ton air over hydraulic jack. If you are doing thousands of holes the ~$250 you will spend (less if you buy seperate and use 20% off coupouns ) will be well worth it
Chris in Maine
Reply With Quote
Old 10-25-2013, 10:11 PM
camdigger's Avatar
camdigger camdigger is offline
Roving Reporter
Join Date: Aug 2008
Location: Central Oilberta
Posts: 4,348

Hmmm, hundreds and thousands of holes with a hydraulic jack? I'd be real concerned with cycle time.

If 6 t is overkill, what is needed to do the punching? If the forces are within reason, a mechanical system like a fly press would be faster.

For ease of operation, a slight modification to the bleed screw ( big knob to make releasing quicker and easier) on an air over hyd jack would make the operation easy, just time consuming. If 6 t is over kill, 20 T is way overkill, but the 20T air over units can be had for under $100.

The other factor is that a compressor purchase would inflate the cost. IIRC, a 20 t air over hyd jack needs 4 cfm for near continuous use like what you'll needs for the 100s and 1000s of holes.
Design to 0.001", measure to 1/32", cut with an axe, grind to fit..
Reply With Quote
Old 10-26-2013, 07:50 AM
RED caddy's Avatar
RED caddy RED caddy is offline

10-28-1951 to 4-19-2021
Da Chief
Join Date: Aug 2004
Location: Venice, Florida
Posts: 5,556

+1 on the air over setup. I would use taper pins to preserve alignment, (frame and die's) they better resist shear forces that would try to push the frame out of square. (It's gonna be tough to maintain a tight setup and punch alignment with so many pieces. all in a pile.

A 160 MPH drive, down a 2 lane blacktop, all by yourself, is NOT anti-social behaviour... I drag race because football, baseball, and golf only need ONE ball. Paul.

What I really need to know is, WHEN DOES THE SHOOTING START?
Reply With Quote
Old 10-26-2013, 05:16 PM
allessence's Avatar
allessence allessence is offline
Gadget Girl
Join Date: Jul 2009
Location: MA, 01543
Posts: 7,116

I have a 3 ton punch press that would work wonders on something like that..

As for the air setup. It's going to be faster than hand work but still going to take you a really long time.

Is there a way to get a multi punch setup? Then you could utilize the 20tons of force and punch out a few at a time..

If I defend myself I am attacked.

My meaningless thoughts are showing me a meaningless world.

My attack thoughts are attacking my invulnerability.

I'd like to think of something smart, but I don't want to hurt myself.

My google+ page

DoALL 36"
Another Johnson model J Project
Lathe? Maybe..... 1958 SBL 13"
Yeti Esseti Aka running welder on 3phase.
Reply With Quote
Old 10-26-2013, 05:46 PM
bigegg's Avatar
bigegg bigegg is offline
Join Date: Jul 2012
Location: Yorkshire, England
Posts: 98

You want a fly press

No idea if they made it to your side of the pond, but over here in England, you can pick up a no.6 (10T) for about $100 (equivalent).

One of them will punch your holes as fast as you can swing your arm
Reply With Quote
Old 10-27-2013, 10:44 AM
Roundrocktom's Avatar
Roundrocktom Roundrocktom is offline
Senior Member
Join Date: Feb 2007
Location: Austin, TX
Posts: 742

I've never seen the fly press... those are neat.

Arbor Press is way to go.

For thinner aluminum, a Unibit is hard to beat. Lots of variations on those, but fast and a clean hole.

Time to dig out the machinery handbook to see how much pressure is needed.

Trivia... in order to toss oil filters into the trash, they require they are compressed to less than 20% original volume. After a few crush cycles, pumping a 20T jack by hand is for the birds! I need a air/hydo jack. EDIT: NAPA GOLD - Wix filters. Notice that one that had trapped oil needed almost the full 20T to burst open to release the oil. The Fram is much lighter construction.
Attached Thumbnails
Click image for larger version

Name:	oil_filter_crusher.jpg
Views:	714
Size:	77.0 KB
ID:	110574   Click image for larger version

Name:	oil_filter_crusher_2.jpg
Views:	657
Size:	100.3 KB
ID:	110575  
Reply With Quote
Old 10-27-2013, 01:06 PM
Roundrocktom's Avatar
Roundrocktom Roundrocktom is offline
Senior Member
Join Date: Feb 2007
Location: Austin, TX
Posts: 742

EDIT.... Uh on, Arbor press won't do unless you have a 20T Arbor Press! They are hydraulic "portable" presses.

Photo from Machinist Handbook. (1991 edition, from memory) noted page 1242 Punches, Dies, and Press Work.

Pressure required for punching.

PI*diameter*S(shearing strength)*thickness/2000

PI*One Inch diameter * 20,000 * .375 /2000

(I do the calculation in my head, someone care to check? Only math is just 3.14 x .375... which is a little under 1.2.. just carry zeros)

It about 12 tons to punch aluminum slug (1" x 3/8" thick)

Time to return the 6 ton press!
Attached Thumbnails
Click image for larger version

Name:	P1000549.jpg
Views:	582
Size:	101.5 KB
ID:	110590  

Last edited by Roundrocktom; 10-27-2013 at 01:13 PM.
Reply With Quote

habor freight press, unipunch

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Web Search:

All times are GMT -5. The time now is 04:11 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.