Shop Floor Talk  

Go Back   Shop Floor Talk > Welding and Metalworking Forums > Machining

SFT Search:   
Reply
 
Thread Tools Display Modes
  #1  
Old 12-18-2018, 08:24 AM
toprecycler's Avatar
toprecycler toprecycler is offline
Elite Member
 
Join Date: Jan 2009
Location: Petoskey, Michigan
Posts: 4,028
Default Made a thin bushing

Coworker asked me if I wanted a challenge yesterday. He need a thin seal install bushing made to install a $200 seal without cutting it on sharp edge of a hydraulic motor shaft. I turn out a piece of alum round for him. It was only about .030” thick in the big part tapering to nothing for the seal to start, and where it went over the shoulder, was only .010” thick. He and the boss was impressed. Probably will be making more of these in the future for different applications. When I parted it off, it created a slightly rolled edge that keeps it snug on the shaft, so it should work good.Click image for larger version

Name:	IMG_7570.JPG
Views:	246
Size:	190.1 KB
ID:	148498Click image for larger version

Name:	IMG_7569.JPG
Views:	342
Size:	171.6 KB
ID:	148497


Sent from my iPhone using ShopFloorTalk
__________________
Brian

You don't know what you don't know.

"It's what you learn after you know it all that counts." John Wooden
Reply With Quote
  #2  
Old 12-18-2018, 11:18 AM
digr's Avatar
digr digr is offline
The Real Deal
 
Join Date: Apr 2005
Location: Duluth MN
Posts: 8,182
Default

Nice job! I had to do the same thing when I put my Rivett lathe back together.
__________________
Drawing by Smartdraw
Reply With Quote
  #3  
Old 12-26-2018, 11:01 PM
Whitetrash's Avatar
Whitetrash Whitetrash is online now
Elite Member
 
Join Date: Mar 2009
Location: Estes Park, CO [Around 8000 Ft. Elv.]
Posts: 2,933
Default

Nice, should work like a champ.
__________________
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
Reply With Quote
  #4  
Old 12-27-2018, 01:26 AM
LKeithR's Avatar
LKeithR LKeithR is offline
Hey...wait...is there a prize?
 
Join Date: Aug 2011
Location: Langley, B.C.
Posts: 5,080
Default

A lathe is a wonderful tool isn't it?
__________________
Keith

Measure twice and cut once...or...wait, was that the other way around?
Reply With Quote
  #5  
Old 12-27-2018, 01:33 AM
Whitetrash's Avatar
Whitetrash Whitetrash is online now
Elite Member
 
Join Date: Mar 2009
Location: Estes Park, CO [Around 8000 Ft. Elv.]
Posts: 2,933
Default

Quote:
Originally Posted by LKeithR View Post
A lathe is a wonderful tool isn't it?
Back in the day I asked Dad what machine tool to start with. He didn't hesitate a lick. "Start with a Lathe" It can build every other tool in the shop was his reply
__________________
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
Reply With Quote
  #6  
Old 03-27-2019, 07:22 PM
toprecycler's Avatar
toprecycler toprecycler is offline
Elite Member
 
Join Date: Jan 2009
Location: Petoskey, Michigan
Posts: 4,028
Default

Had another small part challenge. When boss asked the other machinist and I about it, the other guy said give it to me since I like making small parts.

The one on the right was the original, my copy is the left one.

Click image for larger version

Name:	IMG_0055.JPG
Views:	114
Size:	180.8 KB
ID:	150135Click image for larger version

Name:	IMG_0056.JPG
Views:	115
Size:	192.9 KB
ID:	150136Click image for larger version

Name:	IMG_0057.JPG
Views:	206
Size:	159.9 KB
ID:	150137


Sent from my iPhone using ShopFloorTalk
__________________
Brian

You don't know what you don't know.

"It's what you learn after you know it all that counts." John Wooden
Reply With Quote
  #7  
Old 03-28-2019, 07:19 PM
toprecycler's Avatar
toprecycler toprecycler is offline
Elite Member
 
Join Date: Jan 2009
Location: Petoskey, Michigan
Posts: 4,028
Default

Today’s small part challenge, a detent pin for some old hydraulic valve that parts are not available anymore. Customer thinks he broke the threaded end off when he tore the valve apart, and we think he lost a washer in the process too. I had the welder tig a bit on the broken thread to get it out of the spool, and then the customer thought he had found a spare parts online somewhere and spent $400, only to find out it was not the right parts. So I got the go ahead to make this little part. Had to order in some 4140 because it has to be sent out to be heat treated. Turned out pretty nice, I think. Click image for larger version

Name:	IMG_0082.JPG
Views:	116
Size:	177.3 KB
ID:	150158Click image for larger version

Name:	IMG_0085.JPG
Views:	131
Size:	190.7 KB
ID:	150159Click image for larger version

Name:	IMG_0086.JPG
Views:	190
Size:	195.6 KB
ID:	150160Click image for larger version

Name:	IMG_0087.JPG
Views:	119
Size:	196.4 KB
ID:	150161


Sent from my iPhone using ShopFloorTalk
__________________
Brian

You don't know what you don't know.

"It's what you learn after you know it all that counts." John Wooden
Reply With Quote
  #8  
Old 03-28-2019, 07:50 PM
digr's Avatar
digr digr is offline
The Real Deal
 
Join Date: Apr 2005
Location: Duluth MN
Posts: 8,182
Default

Nice work!!!! What are you trying to do get on steady?
__________________
Drawing by Smartdraw
Reply With Quote
  #9  
Old 03-28-2019, 08:14 PM
milomilo's Avatar
milomilo milomilo is offline
Auction Addict
 
Join Date: May 2010
Location: Wheatland, Wyoming
Posts: 15,308
Default

Quote:
Originally Posted by toprecycler View Post
Today’s small part challenge, a detent pin for some old hydraulic valve that parts are not available anymore. Customer thinks he broke the threaded end off when he tore the valve apart, and we think he lost a washer in the process too. I had the welder tig a bit on the broken thread to get it out of the spool, and then the customer thought he had found a spare parts online somewhere and spent $400, only to find out it was not the right parts. So I got the go ahead to make this little part. Had to order in some 4140 because it has to be sent out to be heat treated. Turned out pretty nice, I think. Attachment 150158Attachment 150159Attachment 150160Attachment 150161


Sent from my iPhone using ShopFloorTalk
Couldn't you heat treat it in your shop?
__________________
Chris

Liberty has never come from Government. Liberty has always come from the subjects of it. The history of liberty is a history of limitations of governmental power, not the increase of it.
Woodrow Wilson
Reply With Quote
  #10  
Old 03-29-2019, 11:17 AM
toprecycler's Avatar
toprecycler toprecycler is offline
Elite Member
 
Join Date: Jan 2009
Location: Petoskey, Michigan
Posts: 4,028
Default

Quote:
Originally Posted by milomilo View Post
Couldn't you heat treat it in your shop?


I could, but lack the proper equipment to make sure the temps are right, and to verify how hard the original is. My shop likes to make sure all our i’s are dotted and t’s crossed right when we ship something out to a customer so we can guarantee it to work. We will farm something out to make sure it is correct.


Sent from my iPhone using ShopFloorTalk
__________________
Brian

You don't know what you don't know.

"It's what you learn after you know it all that counts." John Wooden
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Web Search:

All times are GMT -5. The time now is 10:47 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.