Shop Floor Talk  

Go Back   Shop Floor Talk > Welding and Metalworking Forums > Blacksmithing & Forming

SFT Search:   
Reply
 
Thread Tools Display Modes
  #1  
Old 11-06-2017, 02:59 PM
Scratch Scratch is offline
Senior Member
 
Join Date: Feb 2007
Location: Hudson WI
Posts: 644
Default New Coal Forge Build! (pic heavy)

Well I recently finished up my third forge and thought I'd share the build with you all as I think it turned out pretty well. Sorry about all the pics, but everybody like pics right!?!?
Back in about 2007, I built a real nice propane gas forge for my very first forge, and while it worked well, I quickly realized that I needed something that could handle a wider piece. So about a year later, I ended up making a simple coal forge from a wheelbarrow tub and a clothes dryer blower. I figured I'd make something simple, quick and cheap... then when I get more experience and could figure out exactly what I wanted in a forge, I could build one specifically to suit my needs. Well I finally went and did it, and I took pictures too! ... Lots and lots of pictures...

To reminisce... here is a picture of my first gas forge, and also my simple wheelbarrow forge.
Attached Thumbnails
Click image for larger version

Name:	a.jpg
Views:	238
Size:	84.3 KB
ID:	141845   Click image for larger version

Name:	b.jpg
Views:	243
Size:	102.8 KB
ID:	141846  

Last edited by Scratch; 11-06-2017 at 03:19 PM.
Reply With Quote
  #2  
Old 11-06-2017, 03:00 PM
Scratch Scratch is offline
Senior Member
 
Join Date: Feb 2007
Location: Hudson WI
Posts: 644
Default

Now, let's get on with the build!
I've always considered the the firepot to be the heart of the forge, so that's what I started with. I have a CNC plasma cutting table so I drew up the firepot in Corel Draw, then cut out the pieces from 1/4" A36 HR steel and welded it up.
Attached Thumbnails
Click image for larger version

Name:	1.jpg
Views:	229
Size:	44.6 KB
ID:	141847   Click image for larger version

Name:	2.jpg
Views:	194
Size:	171.1 KB
ID:	141848   Click image for larger version

Name:	3.jpg
Views:	195
Size:	73.2 KB
ID:	141849  
Reply With Quote
  #3  
Old 11-06-2017, 03:01 PM
Scratch Scratch is offline
Senior Member
 
Join Date: Feb 2007
Location: Hudson WI
Posts: 644
Default

Then I drew up an easy to replace "grate plate" for the bottom of the firpot. I was going to just weld in some bars for the grate, but thought I could easily cut a new one when it gets burnt out, and just drop it in place like this. The extra thickness will help the firpot last longer as well.
Attached Thumbnails
Click image for larger version

Name:	4.jpg
Views:	219
Size:	166.3 KB
ID:	141850   Click image for larger version

Name:	5.jpg
Views:	246
Size:	66.8 KB
ID:	141851   Click image for larger version

Name:	6.jpg
Views:	180
Size:	62.8 KB
ID:	141852  
Reply With Quote
  #4  
Old 11-06-2017, 03:02 PM
Scratch Scratch is offline
Senior Member
 
Join Date: Feb 2007
Location: Hudson WI
Posts: 644
Default

Next I drew up the floor pan and cut it out from 3/16" steel, then drew up the four sides, cut them out, and welded them to the floor pan.
Attached Thumbnails
Click image for larger version

Name:	7.jpg
Views:	190
Size:	52.3 KB
ID:	141853   Click image for larger version

Name:	8.jpg
Views:	183
Size:	30.8 KB
ID:	141854   Click image for larger version

Name:	9.jpg
Views:	238
Size:	44.3 KB
ID:	141855   Click image for larger version

Name:	10.jpg
Views:	194
Size:	51.6 KB
ID:	141856   Click image for larger version

Name:	11.jpg
Views:	181
Size:	82.7 KB
ID:	141857  

Reply With Quote
  #5  
Old 11-06-2017, 03:03 PM
Scratch Scratch is offline
Senior Member
 
Join Date: Feb 2007
Location: Hudson WI
Posts: 644
Default

Then I welded on some legs from 2X2 square tubing, welded some feet on them, and added some wheels on the back legs. The finished floor pan height is 32".
Attached Thumbnails
Click image for larger version

Name:	12.jpg
Views:	200
Size:	66.9 KB
ID:	141858  
Reply With Quote
  #6  
Old 11-06-2017, 03:03 PM
Scratch Scratch is offline
Senior Member
 
Join Date: Feb 2007
Location: Hudson WI
Posts: 644
Default

I tore apart my wheelbarrow forge and used the blower, tuyere, and ash dump from it since it would save time, and it already worked great. I do wish the ash dump was deeper, but I can live with emptying it more often. I also welded on some bracing straps to mount the blower directly to the tuyere.
Attached Thumbnails
Click image for larger version

Name:	13.jpg
Views:	198
Size:	84.2 KB
ID:	141859   Click image for larger version

Name:	14.jpg
Views:	202
Size:	80.3 KB
ID:	141860  
Reply With Quote
Reply

Tags
coal, coal forge, edge metalworks, forge, scratchthejeepguy

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Web Search:

All times are GMT -5. The time now is 06:44 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.