Shop Floor Talk  

Go Back   Shop Floor Talk > Welding and Metalworking Forums > Welding

SFT Search:   
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 07-02-2019, 12:26 PM
Tommy2174 Tommy2174 is offline
Junior Member
 
Join Date: Jul 2019
Location: weeping water, ne
Posts: 16
Default Help on Miller Bobcat 225 10,000w

Hey guys I'm new on here and I have a question about my Miller Bobcat 225. Where my leads plug into I'm only getting 2.4 volts. It does not want to arc. If I put the settings to Wire + and 19-28 volts at max. I can weld a little.
I have checked fuses, I cleaned the brushes, I've unhooked and cleaned all my contact points, I checked the capacitor with a tester and its good. My rheostat gets from about 20 to 30 volts. I have checked and cleaned my R2 resistor. My rpms are about 3,600. I took apart my SR1 rectifier and cleaned it. I get power to my 120v and 240v plugs. They work fine. I have know idea what to check now. If someone could provide me with more info I would really appreciate it. I do have a print out manual of this welder.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Web Search:

All times are GMT -5. The time now is 10:33 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.