Shop Floor Talk  

Go Back   Shop Floor Talk > Welding and Metalworking Forums > Machining

SFT Search:   
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 02-19-2021, 09:47 PM
digr's Avatar
digr digr is offline
The Real Deal
 
Join Date: Apr 2005
Location: Duluth MN
Posts: 8,701
Default Drive shaft

This is a drive shaft off a tractor 1 1/8" dia. and four feet long without a carrier bearing. The splined end is 7/8" that goes threw the clutch plate into a bearing in the flywheel. It is 030" under size and the grooves you see are from the milling of the spline. I don't have a clutch plate to fit. What do we think is the best option is? weld it up and turn it down (hard to do with the splines)

turn the end down to 5/8" and make press on sleeve and turn to size

drill and ream to 5/8" and press in a plug and turn to size

I was told it runs a brush hog
Attached Thumbnails
Click image for larger version

Name:	DSCN5238.jpg
Views:	90
Size:	176.4 KB
ID:	159587   Click image for larger version

Name:	DSCN5239.jpg
Views:	86
Size:	188.3 KB
ID:	159588   Click image for larger version

Name:	shaft.jpg
Views:	81
Size:	50.1 KB
ID:	159589  
__________________
Drawing by Smartdraw
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Web Search:

All times are GMT -5. The time now is 11:40 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.