Shop Floor Talk  

Go Back   Shop Floor Talk > Welding and Metalworking Forums > Machining

 
 
SFT Search:
Reply
 
Thread Tools Display Modes
  #1  
Old 07-04-2016, 06:11 PM
cutter's Avatar
cutter cutter is offline

12-29-1943 to 1-17-2020
Curmudgeon emeritus
 
Join Date: Jun 2004
Location: Lubbock,Texas
Posts: 33,097
Default Rong Fu Mill/Drill head lift guide

This is food for thought for tackit in the midst of his travails with his mill/drill.

Some of you may remember I built a motorized head lift for Mildred a couple or three years ago. I was hoping that it might at least minimize the rotational drift from registration experienced with round column mills.
It did not.

I have posted a You Tube video which demonstrates that she still shifted both to the right and to the left a 1/2 an inch or so under travel.
The indicator in this video is not touch the test bar; it is only a pointer to show how much drift there is.

So I worked for about a year, off & on, to build a guide bar to at least minimize this rather glaring deficiency so that poor old Mildred could feel prouder of her performance. This was inspired by the one Mark Ball posted a couple of pictures of 2 or 3 years ago.
I did not post this build project because of the tedium involved, the false starts & do over's and the general frustration all that entailed, scattered over most of 2014.

But I do have another You Tube video showing the result. It limits her error to plus or minus .005" and she usually settles down to about zero when the motor switches off.
Not perfect but honestly, for the kind of work I get around to doing it is generally good enough & certainly a lot better than trying to use that damned crank, which now resides in a drawer.

Head lift guide video # eleventyfortyone or something.
In this case the indicator is in contact with that old WWII boring bar from my grandfather's tool chest.
__________________
cutter
Housekeeping Staff: the Gatekeeper
Director of Policy, Syntax and Grammar (by appointment)

"Dr. Chandran, will I dream?"

Just Keep Walking

"I am not a body, I am free.
For I am still as God created me."
Reply With Quote
  #2  
Old 07-04-2016, 07:53 PM
clive's Avatar
clive clive is offline
 
Join Date: May 2007
Location: Western Australia
Posts: 2,149
Default

Cutter, I have a mill/drill ( but with a tilting head) and the round column is a pain, I tried to find the alterations you did to steady it but couldn't. Do you have a link to that?
Clive
__________________
It's So Easy
Reply With Quote
  #3  
Old 07-05-2016, 08:33 AM
dubby's Avatar
dubby dubby is offline
Twice the size--half the man
 
Join Date: Apr 2006
Location: Lubbock, TX
Posts: 10,789
Default

That's pretty darn good, and better than most will ever get out of their machines. Great job!
__________________
I've always had more time than money.

Wade's Custom Kydex
Reply With Quote
  #4  
Old 07-05-2016, 09:03 AM
tackit's Avatar
tackit tackit is offline
Elite Member
 
Join Date: Jul 2004
Location: North Central Indiana
Posts: 1,705
Default

That's really great work cutter, I'm impressed.
Reply With Quote
  #5  
Old 07-05-2016, 12:23 PM
cutter's Avatar
cutter cutter is offline

12-29-1943 to 1-17-2020
Curmudgeon emeritus
 
Join Date: Jun 2004
Location: Lubbock,Texas
Posts: 33,097
Default

Quote:
Originally Posted by cutter View Post
I did not post this build project because of the tedium involved, the false starts & do over's and the general frustration all that entailed, scattered over most of 2014.
Quote:
Originally Posted by clive View Post
Cutter, I have a mill/drill ( but with a tilting head) and the round column is a pain, I tried to find the alterations you did to steady it but couldn't. Do you have a link to that?
Clive
I did not post a thread about it, Clive. I took hundreds of pictures along the way, most of which are details but they are disorganized and probably not very helpful unless I put a lot of time into trying to recover my memory of "what was that all about?" It really was a frustrating build because this old mill was downright determined to defend her right to choose to rotate. I was very surprised at how much torque was involved and how much force it took to overcome it.

I have looked at the pictures, trying to find a decent overview and nothing I have would be very helpful.
However, this thing really does work so it is doable. I'll try to get some decent pictures to show you here.
__________________
cutter
Housekeeping Staff: the Gatekeeper
Director of Policy, Syntax and Grammar (by appointment)

"Dr. Chandran, will I dream?"

Just Keep Walking

"I am not a body, I am free.
For I am still as God created me."
Reply With Quote
  #6  
Old 07-05-2016, 06:33 PM
clive's Avatar
clive clive is offline
 
Join Date: May 2007
Location: Western Australia
Posts: 2,149
Default

Thanks, I guess a shot of the finished article, those who are keen should be able to work it backwards from there.
Clive
__________________
It's So Easy
Reply With Quote
  #7  
Old 07-06-2016, 07:55 AM
MarkBall2's Avatar
MarkBall2 MarkBall2 is offline
Elite Member
 
Join Date: May 2008
Location: Ogden KS
Posts: 2,579
Send a message via Yahoo to MarkBall2
Default

Now why didn't I think of that?????
Attached Thumbnails
Click image for larger version

Name:	IMAG0223.jpg
Views:	1838
Size:	97.1 KB
ID:	133417   Click image for larger version

Name:	IMAG0221.jpg
Views:	1681
Size:	97.6 KB
ID:	133418   Click image for larger version

Name:	IMAG0224.jpg
Views:	1863
Size:	95.0 KB
ID:	133419  
__________________
Mark

I haven't always been a nurse..........


Oxy/Acetylene set
Hand/Power tools

Harbor Freight Tubing Roller
Craftsman 12 x 36 lathe
New to me Enco GL-30B Mill/Drill Thank you 1800Miner
Papa Lion's Gate Build

I don't do nuttin half azzed. I phawk it up completely, given half a chance.
Reply With Quote
  #8  
Old 07-06-2016, 11:41 AM
cutter's Avatar
cutter cutter is offline

12-29-1943 to 1-17-2020
Curmudgeon emeritus
 
Join Date: Jun 2004
Location: Lubbock,Texas
Posts: 33,097
Default

Quote:
Originally Posted by MarkBall2 View Post
Now why didn't I think of that?????
Quote:
Originally Posted by cutter View Post

This was inspired by the one Mark Ball posted a couple of pictures of 2 or 3 years ago.
ummmm?
__________________
cutter
Housekeeping Staff: the Gatekeeper
Director of Policy, Syntax and Grammar (by appointment)

"Dr. Chandran, will I dream?"

Just Keep Walking

"I am not a body, I am free.
For I am still as God created me."
Reply With Quote
  #9  
Old 07-06-2016, 01:11 PM
MarkBall2's Avatar
MarkBall2 MarkBall2 is offline
Elite Member
 
Join Date: May 2008
Location: Ogden KS
Posts: 2,579
Send a message via Yahoo to MarkBall2
Default

Quote:
Originally Posted by cutter View Post
ummmm?

electric lift (head slap)
__________________
Mark

I haven't always been a nurse..........


Oxy/Acetylene set
Hand/Power tools

Harbor Freight Tubing Roller
Craftsman 12 x 36 lathe
New to me Enco GL-30B Mill/Drill Thank you 1800Miner
Papa Lion's Gate Build

I don't do nuttin half azzed. I phawk it up completely, given half a chance.
Reply With Quote
  #10  
Old 07-09-2016, 04:49 PM
cutter's Avatar
cutter cutter is offline

12-29-1943 to 1-17-2020
Curmudgeon emeritus
 
Join Date: Jun 2004
Location: Lubbock,Texas
Posts: 33,097
Default

Quote:
Originally Posted by clive View Post
Thanks, I guess a shot of the finished article, those who are keen should be able to work it backwards from there.
Clive
Now Clive, surely you've been around here long enough to know me better than that.
However, I will try to be more brief than my usual.
I've been noodling around in the pictures for a couple of days trying to reorganize what my thoughts were from 2013 and '14 when I was pecking at this project.

First of all I have some Thompson linear bearings & a 3/4 inch rod from an old laminating machine or something that I dug out of a dumpster behind a print shop. I just had to try them to see how that worked.
Don't do that.
Linear bearings have way too much play in them.

Second thing, the castings on the head and on the base of these Rong Fu or Harbor Freight or Jet or whoever puts their names on these mill/drills do not have any flat surfaces that are perpendicular to the spindle. So don't think that you're going to be able to bolt any kind or right angle mounting bracket to them & have a useful basis for tracking in line with the column or the spindle.

1 - 5. So I determined that Mark has it right with making a yoke to attach to the top of the column. I made mine from a small slab of 1/2" aluminum plate that I'd had for over 20 years. First I roughed it out on the old Delta bandsaw & milled the straight edges just so they'd be smoother.

I rough cut the semi-circle on the vertical bandsaw then used a flycutter in reverse to cut to the pencil line I had guesstimated before I started cutting. You can imagine my astonishment to find that it fit perfectly to the column on my first attempt. The damned thing actually fit so snugly that it would hold itself to the column with no weight or pressure on it.

So I very gingerly milled a slot in the center of the yoke to fit over the rack because this attachment has to fit on the crank side of the head. That's where the rack is.

Then I made a "headband" to hold the yoke to the top of the column.
Attached Thumbnails
Click image for larger version

Name:	2014-06-12 17.24.59.jpg
Views:	1396
Size:	64.6 KB
ID:	133519   Click image for larger version

Name:	flycutter.jpg
Views:	1374
Size:	64.2 KB
ID:	133520   Click image for larger version

Name:	2014-06-13 18.44.35.jpg
Views:	1499
Size:	47.6 KB
ID:	133521   Click image for larger version

Name:	2014-06-14 17.14.01.jpg
Views:	1500
Size:	68.5 KB
ID:	133522   Click image for larger version

Name:	2014-06-16 01.56.08.jpg
Views:	1573
Size:	83.6 KB
ID:	133523  

__________________
cutter
Housekeeping Staff: the Gatekeeper
Director of Policy, Syntax and Grammar (by appointment)

"Dr. Chandran, will I dream?"

Just Keep Walking

"I am not a body, I am free.
For I am still as God created me."

Last edited by cutter; 07-09-2016 at 05:47 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Web Search:

All times are GMT -5. The time now is 05:21 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.