Calling John McCracken . . . . . . .

[Markopolo]

Yo John (or anyone else that might be able to help).....

Can you tell about what model year this machine is by looking at it ?

http://cgi.ebay.com/ws/eBayISAPI.dll...ayphotohosting

[jpill]

Pre 1973 because of the vacuum idler. If the face plate is authentic it looks to be one of the 1960's redfaces. I think JT will confirm that that would make it one of the most desirable SA-200's to be had among the pipelining crowd.

Was that okay John?

Jeff

[Franz]

Marko, I'll guarantee you that machine is a complete repaint with a new faceplate.
JT has the chart on his website, but you need the serial # and possibly the code # to date the machine.

[jpill]

Of course Marko, Franz's machine is also one of the sought after 60's models
and you know whats been done to it. Also a very reasonable price I might add compared to what I paid for mine.

Jeff

[Markopolo]

Originally Posted by Franz

Marko, I'll guarantee you that machine is a complete repaint with a new faceplate.
JT has the chart on his website, but you need the serial # and possibly the code # to date the machine.

I know Uncle Franz, but I don't have the serial or code number. I just thought someone could give me a "ballpark" guess-timate.

I guess the old ones are almost as good as the new ones....(if they work)......and lot's cheaper !

[Franz]

I think there are people who'd contend the older machines are better than the new machines. Old ones can be updated with the new idlers and other bells & whistles, but the new machines will never be built the way the old ones were.
Lincoln rarely had a machine come back when the company was run James Lincoln's way, and the men who built them earned damn good money doing their job right the first time. Funny thing, when the old man was running the company they didn't even need QC inspectors cause everybody was in charge of Quality.
The history of Lincoln Electric is very interesting, and a lot of Jap[anese manufacturing is based on James Lincoln's concepts.

[Pile Buck]

Marko, about the only way I can describe to you how these machines run. Is just imagine setting way back in the seat of a Lincoln Town Car, your left hand draped over the steering wheel, and your right hand wrapped around the beverage of your choice…. These things are so smooth. Lincoln just has it’s own power, very hard to describe

Not to hijack your thread, but this was just giving to me. What engine should I be looking for? No need for diesel, the days of me pushing a machine to the max are long gone. Would like to get a 4 or 6 cylinder gas engine for it. Was thinking of a little 6-cylinder Chevy, any better ideas?

[Pile Buck]

The ID plate, Shield Arc, SAE 200, Volts 40, AMPS 200, RPM 1500

[JTMcC.]

Originally Posted by Pile Buck

Was thinking of a little 6-cylinder Chevy, any better ideas?

80" Harley-Davidson. Or an old Ford flathead V-8.

Get the serial number off that thing and you can check the year of manufacture on the last page of my website.

Quite a haul there! I like it.


JTMcC.

[boilerman]

Originally Posted by Pile Buck

Not to hijack your thread, but this was just giving to me. What engine should I be looking for? No need for diesel, the days of me pushing a machine to the max are long gone. Would like to get a 4 or 6 cylinder gas engine for it. Was thinking of a little 6-cylinder Chevy, any better ideas?

i just got rid of a ford 6 flat head...ran good ...no smoke ....guy was making a flat belt driven saw mill