View Single Post
  #15  
Old 10-07-2010, 05:17 PM
Hollywood Hollywood is offline
Newbie
 
Join Date: Aug 2005
Location: Columbus, GA
Posts: 7
Send a message via ICQ to Hollywood Send a message via AIM to Hollywood Send a message via Yahoo to Hollywood
Default

Wade, your giving me to much credit on the welding table. It was an easy modification of a car lift similar to this:
http://www.revolutionlift.com/RMR6-6...Lift-P4C9.aspx

What I did was remove the lift arms from the base of the lift as well grind off the couple of "stops" that were welded to it to get a flat base. I had the distributor cut the metal to size before we picked it up. I added a quick release to the hydraulic hose so the pump can be wheeled completely away from the table. The plus to that is that when I get my JD2 bender I can run it off the same electric over hydraulic pump. The lift itself has a pair of hard steel rollers on one end, and the pump cart is used as a lever to pry up the other end. You "steer" it with the pump cart...not an easy task, because the thing is pretty heavy.
Reply With Quote