View Single Post
  #6  
Old 12-05-2013, 08:25 PM
Ricker Ricker is offline
Junior Member
 
Join Date: Jan 2008
Location: Jamestow NY
Posts: 22
Default

I made a tension pulley for one once similar to the drawing.
I used 1" pipe ang 1/2" round bar stock. Ran for a couple years
in a factory setting not sure if its still there or not. FYI the conveyor
wasn't in constant motion and thr "pulley was at about 40-60 rpm.

Ricker
Reply With Quote