View Single Post
  #2  
Old 04-14-2020, 10:11 PM
LKeithR's Avatar
LKeithR LKeithR is offline
Hey...wait...is there a prize?
 
Join Date: Aug 2011
Location: Langley, B.C.
Posts: 5,436
Default

What temper? 6061-T6 is the most common and it's definitely NOT a bendable alloy. Over the years we've made thousands of bends using 6063 but on the odd occasion that we've been sent the wrong material we've rarely been able to make it to 45 degrees before the material breaks...
__________________
Keith

Measure twice and cut once...or...wait, was that the other way around?
Reply With Quote