View Single Post
Old 06-09-2019, 02:31 PM
Rob65 Rob65 is offline
Join Date: Apr 2010
Location: Sheffield UK
Posts: 121

The spec I just looked at said 30% duty cycle at 130amps not 145.

If that’s the case my guess would be about 10% at full power. That’s probably one welding rod and the machine will be about ready to catch fire.

In my view the 145amp figure is just an attention grabbing headline. It’s really no more that a 130amp, so ok for a bit of work with 1/8” rods and that’s about it.


Sent from my iPhone using ShopFloorTalk mobile app
Reply With Quote