View Single Post
  #1  
Old 05-26-2018, 03:00 PM
milomilo's Avatar
milomilo milomilo is offline
Auction Addict
 
Join Date: May 2010
Location: Wheatland, Wyoming
Posts: 18,002
Default Tires that do not go flat

I have this landscape rake I pull behind the 4 wheeler to drag the drives around the house and the shop. When I bought it it had some lawn mower wheels on it and the hubs were shot. So put on a couple rubber tired wheels. Every other time I wanted to use it the goat heads around here had caused a slow leak.

So decoded I needed some wheels that would not go flat. Looked in the stash of used wheels, nada. Looked at some of the old steel wheels off of old farm implements, but all the wrong size.

Decided to build my own steel wheels. I could have went to HF and bought two, but what is the fun it that.

Found a piece of 6" thin wall pipe that split in half would make two wheels with no waste. Used some 3" angle iron for the spokes and a 2 1/2" long piece of 1" round for the hub. Drill out the round to 5/8" ID to fit the axle.

More pics after welding and installation.
Attached Thumbnails
Click image for larger version

Name:	SAM_1911.jpg
Views:	483
Size:	137.3 KB
ID:	145168   Click image for larger version

Name:	SAM_1912.jpg
Views:	494
Size:	131.5 KB
ID:	145169   Click image for larger version

Name:	SAM_1913.jpg
Views:	490
Size:	104.1 KB
ID:	145170   Click image for larger version

Name:	SAM_1914.jpg
Views:	505
Size:	89.0 KB
ID:	145171   Click image for larger version

Name:	SAM_1917.jpg
Views:	512
Size:	76.8 KB
ID:	145172  

__________________
Chris

The question isn't who is going to let me; it's who is going to stop me.
Reply With Quote