View Single Post
  #8  
Old 02-14-2013, 11:52 PM
Brian C.'s Avatar
Brian C. Brian C. is offline
Director of Security
 
Join Date: Nov 2006
Location: Waverly, OH
Posts: 2,856
Default

X2 on the Big Blu hammers. I see them demoed each year at our conference and they seem to be very good. Also check out John Larson's Iron Kiss Hammers, a very well built machine.

NC Forge build about 6-8 different sizes with multiple burners, they are very good. I had a 3 burner that was about shot when I got it and I used it for several years after that. Then installed the burners on an open front & sides forge that I built.

Jymm Hoffman at Hoffman Forge builds and sells blown forges that I have heard good things about. There are also smaller forges available from Chilie Forge and Diamondback Iron works. All have websites.
__________________
"Getting old aint for sissies"

Admit nothing, deny everything, demand proof

Millermatic 211
Harris oxy/act.
2 propane forges
147 lb. Peter Wright anvil

Last edited by Brian C.; 02-15-2013 at 12:05 AM.
Reply With Quote