Thread: Oh God no
View Single Post
  #9  
Old 07-06-2022, 01:14 AM
LKeithR's Avatar
LKeithR LKeithR is offline
Hey...wait...is there a prize?
 
Join Date: Aug 2011
Location: Langley, B.C.
Posts: 5,620
Default

If you've drill almost all the way through (but with no sign of breakout) you can often take a heavy centre punch and give the piece of material a good whack on the back of the hole. Similar to Gerry's suggestion but you don't have to drill a hole on the backside. It won't work if there's too much material left...
__________________
Keith

Measure twice and cut once...or...wait, was that the other way around?
Reply With Quote