Shop Floor Talk

Shop Floor Talk (https://www.shopfloortalk.com/forums/index.php)
-   Fabrication (https://www.shopfloortalk.com/forums/forumdisplay.php?f=13)
-   -   Horizontal Smoker (https://www.shopfloortalk.com/forums/showthread.php?t=49906)

weldor2005 09-10-2018 10:26 PM

Horizontal Smoker
 
4 Attachment(s)
With the help of the Mid West crew this fall I might as well start the build thread on this smoker. Now as many know the main body was a charitable gift from Neil at the 2017 Mid West get together. One day I finally decided to get it on the table. It's been sitting with the doors cut out for a few months now. The plan is to put a big progress boost on it this year.

The fire box and chimney should be arriving via some of the guests. I appreciate this. Things I still need to acquire would be some sheet steel to cap the ends, some angle for the trays, and some expanded steel for the trays. I also need to figure out how I'm going to mount this thing. On some legs or on a trailer axle.

Enough zibber zabber, here are some pics. Any thoughts on this as we try and ramp up the build progress? Attachment 146904Attachment 146905Attachment 146906Attachment 146907


Sent from my iPhone using ShopFloorTalk mobile app

weldor2005 09-10-2018 10:28 PM

3 Attachment(s)
Attachment 146908Attachment 146909Attachment 146910


Sent from my iPhone using ShopFloorTalk mobile app

Lu47Dan 09-12-2018 04:48 PM

Looks like you are making progress. Remember to put flat stock on the doors to cover the kerf from cutting them out

Sent from my [device_name] using ShopFloorTalk mobile app

weldor2005 10-02-2018 04:16 PM

1 Attachment(s)
Attachment 147246

Material for the majority of the smoker less it's feet. Wasn't too shocked by the pricing either.


Sent from my tether.

SmokinDodge 10-02-2018 10:03 PM

It’ll never work!



:D

weldor2005 10-03-2018 05:56 AM

Quote:

Originally Posted by SmokinDodge (Post 721568)
It’ll never work!







:D



Not if I were doing it. Thank goodness I got the Brain trust coming to town to tell me how I'm doing it wrong.


Sent from my tether.

JBFab 10-03-2018 06:58 PM

Quote:

Originally Posted by weldor2005 (Post 721586)
Not if I were doing it. Thank goodness I got the Brain trust coming to town to tell me how I'm doing it wrong.


Sent from my tether.

That's one of the things I do best!

(BTW, go cut those nasty looking hinges off, we can do better than that!) Lol

Hey do you have the burn table up and running, and if so, any chance you have a piece of 3/16 lying around? (If not I can grab a small piece).

Sent from my [device_name] using ShopFloorTalk mobile app

weldor2005 10-03-2018 07:59 PM

Quote:

Originally Posted by JBFab (Post 721667)
That's one of the things I do best!

(BTW, go cut those nasty looking hinges off, we can do better than that!) Lol

Hey do you have the burn table up and running, and if so, any chance you have a piece of 3/16 lying around? (If not I can grab a small piece).

Sent from my [device_name] using ShopFloorTalk mobile app



I got a peice for the smoker, not an extra. And I plan on running it that weekend.


Sent from my tether.

JBFab 10-03-2018 08:08 PM

Ok, I may have a different file and the supplies to build a handy little gadget for each of the attendees, depending on how many show up.

Sent from my [device_name] using ShopFloorTalk mobile app

JBFab 10-03-2018 08:09 PM

DXF, not different

Sent from my [device_name] using ShopFloorTalk mobile app


All times are GMT -5. The time now is 11:50 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.