Shop Floor Talk

Shop Floor Talk (https://www.shopfloortalk.com/forums/index.php)
-   Fabrication (https://www.shopfloortalk.com/forums/forumdisplay.php?f=13)
-   -   Starting an 80 gallon smoker build... (https://www.shopfloortalk.com/forums/showthread.php?t=37364)

Bender 04-01-2013 08:27 AM

Is that 4" copper pipe!?

Hummve 04-01-2013 08:42 PM

Yes lots of BTU's should be around 80,000 with both burners running. They are running on about 3 psi and the orifice is around a number 60ish bit. Which should be around 40k btu.

That's a little more than the recommended 70k for my cooking area. It can be turned down fairly low.

As far as it burning the pipe out I would think it will take a long time it's sch 40 gas pipe 1".
Quote:

Originally Posted by Bender (Post 542404)
Is that 4" copper pipe!?

Yes that's mostly 4" copper and a little 6" on the bottom I think, pricey stuff and that's just what couldn't fit on the shelf. :-0

Hummve 04-02-2013 10:06 PM

2 Attachment(s)
Got a little done tonight cut out and installed the drains and cut holes for burners.


All times are GMT -5. The time now is 11:06 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2023, vBulletin Solutions Inc.